LE FORUM DU SITE
Wifi, Backtrack, crack WEP et WPA...
Vous n'êtes pas identifié(e).
Pages :: 1
Bonjour, j'espère me présente j'espère suis nouvel inscrit sur le forum (même si je le lis depuis un moment), j'ai un Dell latitude E5510 en double boot kali / Windows 7.
Mon problème consiste le crack avec reaver d'une bbox, cela fait plusieurs jours que je tente de le faire (étant beaucoup plus rapide qu'un bruteforce, d'après ce que j'ai lu).
Ce que j'ai fait :
J'ai ouvert un premier terminal en tapant
Wash -i mon0
Jusque là tout va bien, j'en choisis ma cible. Puis
Reaver -i mon0 -c 6 -b <le bssid> -a -v -l 30 -L
Ce qui me donne plusieurs messages
Warning : failed to associate with <bssid>(ESSID:<essid>)
À plusieurs reprises.
Dans un second terminal je lance une fake authentification avec aireplay
Aireplay-ng -1 120 -a bssid -e essid -h (bssid d'une station que j'ai vu connectée avec airodump-ng) mon0
Et la j'ai testé plein de fois en c'est très aléatoire ! Parfois l'association marche, parfois non, mais dans tous les cas rien ne change dans le 1er terminal.
J'ai donc fait des recherches en j'ai trouvé "bully" qui semble être un tool similaire à reaver
Bully -b bssid -s la station -l 30 -W -c 6 mon0
Et la il met en boucle
Tx (deauth) = timeout
Rx (beacon) = noassoc
.
.
Ma question est donc :
Que dois - je faire pour éviter ce(s) probleme (s) avec reaver et bully
Merci de votre aide
Dernière modification par scuz2 (23-06-2015 22:57:49)
Hors Ligne
Salut,
Essaie en te rapprochant de la box.
Tant vaut l'antenne, tant vaut le poste
Hors Ligne
Ok merci de ta réponse,
je vais essayer et je te tiens au courant.
Hors Ligne
Alors même en étant proche de la box (mais pas trop quand même), du style 2 mètres, reaver me renvoit :
reaver -i mon0 -b E0:CE:C3:C8:5A:9C -vv -c 6
Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <[email protected]>
[+] Switching mon0 to channel 6
[+] Waiting for beacon from E0:CE:C3:C8:5A:9C
[!] WARNING: Failed to associate with E0:CE:C3:C8:5A:9C (ESSID: Numericable-5a96)
et bully
bully mon0 -c 6 -v 3 -b E0:CE:C3:C8:5A:9C -l 30
[!] Bully v1.0-22 - WPS vulnerability assessment utility
[+] Switching interface 'mon0' to channel '6'
[!] Using '00:24:d7:18:f5:54' for the source MAC address
[+] Datalink type set to '127', radiotap headers present
[+] Scanning for beacon from 'e0:ce:c3:c8:5a:9c' on channel '6'
[+] Got beacon for <essid> (e0:ce:c3:c8:5a:9c)
[+] Loading randomized pins from '/root/.bully/pins'
[!] Restoring session from '/root/.bully/e0cec3c85a9c.run'
[+] Index of starting pin number is '0000000'
[+] Last State = 'NoAssoc' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout' Next pin '57249612'
^C
Saved session to '/root/.bully/e0cec3c85a9c.run'
Hors Ligne
Une question : Je vois que tu as placé le thème en crack WEP.
J'en conclu que ton réseau utilise le WEP avec WPS
DANGER ou pas
Il y a du gros bugagge du WPS lorqu'on utilise le WPS avec du WEP.
Le WPS est fait pour fonctionner avec le WPA.
Généralement le WPS foire avec du WEP (avec mon router tout du moins c'est comme ça)
Hors Ligne
Oulah je me suis complètement trompé de section (pour mon premier post en plus, super ! ) j'avais la tête ailleurs parceque je lisais des tutos pour le wep.
Donc oui DANGER
Comment je peux déplacer le topic ?
edit: au fait, qu'est-ce que ça signifie la flamme rouge à gauche du nom du topic ?
Dernière modification par scuz2 (23-06-2015 22:19:43)
Hors Ligne
Hello,
Tu ne peux pas changer ton sujet de place, mais nous pouvons le faire pour toi. Voila, c'est fait, il ne te reste plus qu'à éditer le titre et tout sera OK.
La flamme, ça veut dire que ton topic est en feu! Attention, ça va cramer! Ou bien alors qu'il y a un nouvau message
Hors Ligne
D'accord je change ça,
Haha ok merci bien je me demandais
Hors Ligne
Pages :: 1
Discussion | Réponses | Vues | Dernier message |
---|---|---|---|
Client avec LINKSYS WRT54GL par GClaire
|
2 | 921 | 19-04-2018 04:49:54 par hermelan |
probleme alpha networks r36 par jon12
|
5 | 280 | 16-04-2018 20:04:58 par Henri |
Hostapd avec une Awus036ACH par Bob36180
|
2 | 272 | 30-03-2018 15:25:35 par Bob36180 |
Carte wifi compatible avec hostapd ? par rifianno
|
2 | 478 | 25-03-2018 22:02:40 par rifianno |
crack rar par delco
|
5 | 634 | 16-03-2018 14:04:46 par delco |