Crack-wifi.com FORUM

LE FORUM DU SITE

Wifi, Backtrack, crack WEP et WPA...

Vous n'êtes pas identifié(e).  

Annonce

Visitez la boutique Wifi-highpower.com, votre revendeur agr Alfa Network: du matriel Wifi slectionn, cartes Wifi USB Awus036h et Awus036nh, antennes omnis, yagis, panel, amplis wifi, accessoires...

#26 18-01-2010 10:15:05

qwertazert
Membre Irremplaçable
Inscription : 20-09-2009
Messages : 1 057

Re : petit probleme avec windows 7 je crois!!!!!

essaie de trouver des infos sur la gestions usb et peripherique dans ton bios wink
et post les wink

merci


[img align=g]http://imagik.fr/thumb/133444.jpeg[/img]Moïse dit à Dieu, 10 commandements !!! gravé sur des tablettes en pierres !!! C'est lourd !!!
Vous n'auriez pas une clé usb plutôt ? Dieu lui répondit.
Regardes moi droit dans les cieux et redis moi ça si tu ose !!!
Commandement N'11 : Ton voisin tu ne piratera point (Ceci n'est pas un lien)

Hors Ligne

Annonce

Visitez la boutique Wifi-highpower.com, votre revendeur agr Alfa Network: du matriel Wifi slectionn, cartes Wifi USB Awus036h et Awus036nh, antennes omnis, yagis, panel, amplis wifi, accessoires...

#27 18-01-2010 10:17:16

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

heuuu...je pourrai avoir plus de précision sur quelle jenre d'info je suis suposer poster???
aavec des exemple?
xD


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#28 18-01-2010 10:36:06

qwertazert
Membre Irremplaçable
Inscription : 20-09-2009
Messages : 1 057

Re : petit probleme avec windows 7 je crois!!!!!

des infos sur les usb dans le bios...

Les bios sont tous tellement differents...

c'est a toi de nous sortir tes infos.
en général c'est pas dans la premiere page (c'est plutot gestion des disques)
c'est pas la derniere non plus, (exit and save)

Et comme un screenshot est impossible, prend une photo, le plus pret possible, mais qu'elle ne soit pas flou ...


[img align=g]http://imagik.fr/thumb/133444.jpeg[/img]Moïse dit à Dieu, 10 commandements !!! gravé sur des tablettes en pierres !!! C'est lourd !!!
Vous n'auriez pas une clé usb plutôt ? Dieu lui répondit.
Regardes moi droit dans les cieux et redis moi ça si tu ose !!!
Commandement N'11 : Ton voisin tu ne piratera point (Ceci n'est pas un lien)

Hors Ligne

#29 18-01-2010 10:37:48

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

ok
je poste sa dans les deux jours qui suivent


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#30 19-01-2010 00:15:16

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

Bon voila je me suis rendue dans le BIOs mais je ne m'y retrouve pas alors Je vais t'indiquer ce qu'Il m'indique dans la colonne de gauche tu me dis dans quoi alller et je devrai etre en mesure de m'arrenge rpour te trouver sa par la suite.....

-SYSTEM
system info
memory info
pci info
boot  sequence
-DRIVE
diskette drive
SATA-1
SATA-2
SATA-2
SATA-3
SATA-4
SATA-5
SATA  operation
-ONBOARD DEVICES
integreted NIC
integrated audio
USB controller
rear quad USB
Rear dual usb
front usb
-POWER MANAGEMENT
ac recovery
auto power on
auto power time
remote wake up
quick resume
-MAINTENENCE
service tag
serr message
load default
event log
-POST BEHAVIOR
fast boot numlock key
Os install
post hotkeys
keyboard errors


j'ai pris soins de pas marquer ceux que j'était sur qui avait aps rapport alors j'attend pour ta réponse mec merci d'avance =p


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#31 19-01-2010 00:31:13

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

Tu saurais donner la version, et si possible la DATE de ton Bios ? Ca doit être dans System Info...

Si on voit que la version du Bios a moins d'un mois, on saura qu'il a été mis à jour très récemment, et sans doute de façon silencieuse (et sournoise). Et si c'est le cas, ca va gueuler au scandale big_smile

Hors Ligne

#32 19-01-2010 00:32:48

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

ok je te fait sa toute suite smile xD


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#33 19-01-2010 00:45:26

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

alors voila mon system et les info sur le Bios est le suivant

system    =Dell DM061

Bios version  = 2.4.0 (05/24/07)


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#34 19-01-2010 03:38:41

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

??


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#35 19-01-2010 10:57:46

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

Oké, donc au moins ca prouve que le bios n'a pas été mis à jour par Win7, c'était prévisible mais c'est rassurant quand même...

Bon, si je résume bien, on a 2 problèmes ici :
- ta carte WiFi ne marche plus sous sous BackTrack depuis que tu es passé sur Win7
- le CD de BackTrack 3 ne boote plus depuis que tu es passé sur Win7
J'ai bon ? T'as essayé avec BT4 finale ou pas finalement ?

Ah, et juste un détail... N'oublie pas qu'on a 6 heures de décalage horaire avec toi, donc je sais pas quelle heure il était quand tu as posté "??", mais ici il était 4 heures du matin, donc ne te demande pas trop pourquoi personne n'a répondu wink

Hors Ligne

#36 19-01-2010 12:18:32

qwertazert
Membre Irremplaçable
Inscription : 20-09-2009
Messages : 1 057

Re : petit probleme avec windows 7 je crois!!!!!

je n'ai pas pu répondre plus t, mais j'avais lu le post depuis iphone.

Il n'y a que moi que ça a tilté ?? :

USB controller
rear quad USB
Rear dual usb
front usb

Meme si win7 n'a pas mis a jour le bios, il n'empeche pas qu'il ait pût faire des modifs.
Sors nous les infos sur l'usb cité plus haut wink


[img align=g]http://imagik.fr/thumb/133444.jpeg[/img]Moïse dit à Dieu, 10 commandements !!! gravé sur des tablettes en pierres !!! C'est lourd !!!
Vous n'auriez pas une clé usb plutôt ? Dieu lui répondit.
Regardes moi droit dans les cieux et redis moi ça si tu ose !!!
Commandement N'11 : Ton voisin tu ne piratera point (Ceci n'est pas un lien)

Hors Ligne

#37 19-01-2010 14:58:51

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

antares145 a écrit :

Oké, donc au moins ca prouve que le bios n'a pas été mis à jour par Win7, c'était prévisible mais c'est rassurant quand même...

Bon, si je résume bien, on a 2 problèmes ici :
- ta carte WiFi ne marche plus sous sous BackTrack depuis que tu es passé sur Win7
- le CD de BackTrack 3 ne boote plus depuis que tu es passé sur Win7
J'ai bon ? T'as essayé avec BT4 finale ou pas finalement ?

Ah, et juste un détail... N'oublie pas qu'on a 6 heures de décalage horaire avec toi, donc je sais pas quelle heure il était quand tu as posté "??", mais ici il était 4 heures du matin, donc ne te demande pas trop pourquoi personne n'a répondu wink

Ouai j'avoue  le décalage sa m'échape de fois xD
Non j'ai pas tester bt-4 mais ma carte n'est pas compatible sous bt-4 enfin il la reconnaissai pas alors j'ai pas pris la peine d'essayer je retourne dans le Bios pour donner les info je revien quelques minutes!


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#38 19-01-2010 15:19:18

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

qwertazert a écrit :

je n'ai pas pu répondre plus t, mais j'avais lu le post depuis iphone.

Il n'y a que moi que ça a tilté ?? :

USB controller
rear quad USB
Rear dual usb
front usb

Meme si win7 n'a pas mis a jour le bios, il n'empeche pas qu'il ait pût faire des modifs.
Sors nous les infos sur l'usb cité plus haut wink

Bon voila ce que sa donne:


            --USB CONTROLER
    off                ON        no boot

this field enables and disables the intagrated USB controler


OFF =the usb controler is disabled
ON  =the usb controler is enable
the Bios will not reconize storage devices

the factory default setting in ON

Note:Operating systems with usb support will recognize usb storage device regardless of the nobbot setting

            --REAR QUAD USB
This field enables and disabled the indacaded group of usb ports

ON  =the usb group is enabled
OFF =the usb groupis disabled

the factory defaults setting in ON

   --REAR DUEL USB----->meme chose que rear  quad usb ainssi que front usb..

J'attend de tes nouvelles avec impatience mais je crois avec ce que j'ai lue que le probleme n'est pas la...


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#39 19-01-2010 15:24:47

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

Bon, je suppose qu'au moins ils sont tous sur ON, sinon ca serait très con big_smile

Je confirme que le problème n'est sans doute pas là... Je doute même qu'il soit dans le bios... Bête question, tu es sûr que ce n'est pas ton CD de BT3 fusion qui est griffé,abîmé,... ? hmm

Ce que tu peux aussi faire, c'est booter sur BT3 fusion sans mettre ta clé WiFi, le laisser démarrer jusqu'au moment où il t'affiche le bureau, là tu branches ta clé, tu attends 30 secondes, tu regardes si elle est reconnue (normalement pas...), et puis en console tu tapes "dmesg", pour avoir les messages de debug. Et là dans dedans, tu regardes dans les 15-20 dernières lignes si tu n'as pas un message d'erreur en rapport avec ta clé. Dans le doute, colle nous les messages en question ici et on regardera.

C'est vraiment bizarre comme histoire... Sous Win7 elle fonctionne toujours, au moins ?! Parce que si c'est simplement la carte qui a grillé, là on ne peut rien faire big_smile Je pense que tu devrais quand même essayer avec BT4 finale, avec un peu de chance elle sera reconnue smile

Dernière modification par antares145 (19-01-2010 15:25:36)

Hors Ligne

#40 19-01-2010 15:45:41

qwertazert
Membre Irremplaçable
Inscription : 20-09-2009
Messages : 1 057

Re : petit probleme avec windows 7 je crois!!!!!

1 - t'as essayé ta carte sur un autre port usb ?
2 - essaie de mettre sur off le duel usb (le rear doit etre les usb fixé carte mere, donc laisse sur on)

antares : le probleme est survenu après une install de win7.
donc, vu que c'est du live cd, je ne vois que le bios que win7 aurait put toucher qui pourrait bloquer bt.

(ou alors un mechant virus venant de hadopi pour t'empecher de te connecter lol )


[img align=g]http://imagik.fr/thumb/133444.jpeg[/img]Moïse dit à Dieu, 10 commandements !!! gravé sur des tablettes en pierres !!! C'est lourd !!!
Vous n'auriez pas une clé usb plutôt ? Dieu lui répondit.
Regardes moi droit dans les cieux et redis moi ça si tu ose !!!
Commandement N'11 : Ton voisin tu ne piratera point (Ceci n'est pas un lien)

Hors Ligne

#41 19-01-2010 16:00:43

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

qwertazert a écrit :

antares : le probleme est survenu après une install de win7.
donc, vu que c'est du live cd, je ne vois que le bios que win7 aurait put toucher qui pourrait bloquer bt.

D'accord avec toi, c'est pour ca que je lui ai demandé la version et la date de son bios, voir s'il a pas été mis à jour... Ca n'a pas l'air d'être le cas. Par contre, un OS microsoft qui irait changer lui-même des paramètres dans le Bios, et silencieusement en plus, c'est la première fois que j'entendrais ca hmm mais c'est pas impossible...

Remarque, si ca se trouve c'est le firmware de sa carte WiFi qui a été mis à jour par Win7 et les nouveaux pilotes qui vont avec... Ca aussi la serait une première, mais comme toi je ne vois pas d'autres possibilité qui pourraient créer un problème à travers 2 OS différents, dont 1 live non modifiable sad

+1 Pour l'essayer sur d'autres ports USB, et sans câble d'allonge ! On ne sait jamais wink

Hors Ligne

#42 19-01-2010 16:39:24

Sopor Aeternus
Membre Irremplaçable
Lieu : ๏๑۩&_SopoR_&
Inscription : 12-09-2009
Messages : 886
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

Alors si seven change des info du bios je pense que d'autre personne sur le net en auraient parlé ? non ?

Moi je l'ai installé sur 3 pc  = ras  = aucune Modif   Du bios


1269116221339.gif

(•̪●) Ubuntu 9.10, FreeboxV6,   Alfa 36H 500, 1000, 2000 Mw  NSU - 11NP10-5,   Yagi 18 Dbi  Omni 21.5 Dbi  (•̪●)

Hors Ligne

#43 19-01-2010 20:35:29

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

antares145 a écrit :

Bon, je suppose qu'au moins ils sont tous sur ON, sinon ca serait très con big_smile

Je confirme que le problème n'est sans doute pas là... Je doute même qu'il soit dans le bios... Bête question, tu es sûr que ce n'est pas ton CD de BT3 fusion qui est griffé,abîmé,... ? hmm

Ce que tu peux aussi faire, c'est booter sur BT3 fusion sans mettre ta clé WiFi, le laisser démarrer jusqu'au moment où il t'affiche le bureau, là tu branches ta clé, tu attends 30 secondes, tu regardes si elle est reconnue (normalement pas...), et puis en console tu tapes "dmesg", pour avoir les messages de debug. Et là dans dedans, tu regardes dans les 15-20 dernières lignes si tu n'as pas un message d'erreur en rapport avec ta clé. Dans le doute, colle nous les messages en question ici et on regardera.

C'est vraiment bizarre comme histoire... Sous Win7 elle fonctionne toujours, au moins ?! Parce que si c'est simplement la carte qui a grillé, là on ne peut rien faire big_smile Je pense que tu devrais quand même essayer avec BT4 finale, avec un peu de chance elle sera reconnue smile

Je vais tester avec les 15 20 derniere ligne avec la commande dmesg vais te donner des npuvelle dans les minutes qui suivent  pour eessayer bt-4 final je suis entrein de le telecharger et puis ce neat pas un live cd cest un live usb et non il est pas périmé car il fonctionne chez mon ami je l'est tester avec ma carte wifi dopnc elle n'est pas brulé=)
-je vais du meme coup vérifier les updates aussi on sait jamais:P

Dernière modification par CruorVinco (19-01-2010 20:36:37)


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#44 19-01-2010 20:39:00

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

qwertazert a écrit :

1 - t'as essayé ta carte sur un autre port usb ?
2 - essaie de mettre sur off le duel usb (le rear doit etre les usb fixé carte mere, donc laisse sur on)

antares : le probleme est survenu après une install de win7.
donc, vu que c'est du live cd, je ne vois que le bios que win7 aurait put toucher qui pourrait bloquer bt.

(ou alors un mechant virus venant de hadopi pour t'empecher de te connecter lol )

entierement d.'accort avec toi sur que seven est la cause probable..=)


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#45 19-01-2010 21:30:51

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

alors voila ce que ca m'a donnner vous pourrez put-etre m'en dire  plus!!!!

bt ~ # dmesg
]
pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfecf]
pci 0000:00:1f.2: reg 24 io port: [0xeca0-0xecaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xdffdab00-0xdffdabff]
pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
pci 0000:00:1f.5: reg 10 io port: [0xfe40-0xfe47]
pci 0000:00:1f.5: reg 14 io port: [0xfe50-0xfe53]
pci 0000:00:1f.5: reg 18 io port: [0xfe60-0xfe67]
pci 0000:00:1f.5: reg 1c io port: [0xfe70-0xfe73]
pci 0000:00:1f.5: reg 20 io port: [0xfed0-0xfedf]
pci 0000:00:1f.5: reg 24 io port: [0xecb0-0xecbf]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xdfdf0000-0xdfdfffff]
pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xdfe00000-0xdfe1ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 64bit mmio: [0xdfdec000-0xdfdeffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
pci 0000:03:03.0: reg 10 32bit mmio: [0xdfbf0000-0xdfbfffff]
pci 0000:03:03.0: reg 14 io port: [0xccf8-0xccff]
pci 0000:03:03.0: PME# supported from D3hot D3cold
pci 0000:03:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
Switched to high resolution mode on CPU 0
pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:06: iomem range 0x0-0x9ffff could not be reserved
system 00:06: iomem range 0x100000-0xffffff could not be reserved
system 00:06: iomem range 0x1000000-0x9fe51bff could not be reserved
system 00:06: iomem range 0xf0000-0xfffff could not be reserved
system 00:06: iomem range 0xc0000-0xd3fff could not be reserved
system 00:06: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:06: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:06: iomem range 0xffc00000-0xffffffff has been reserved
system 00:07: ioport range 0x100-0x1fe has been reserved
system 00:07: ioport range 0x200-0x277 has been reserved
system 00:07: ioport range 0x280-0x2e7 has been reserved
system 00:07: ioport range 0x2e8-0x2ef has been reserved
system 00:07: ioport range 0x2f0-0x2f7 has been reserved
system 00:07: ioport range 0x2f8-0x2ff has been reserved
system 00:07: ioport range 0x300-0x377 has been reserved
system 00:07: ioport range 0x380-0x3bb has been reserved
system 00:07: ioport range 0x3c0-0x3e7 has been reserved
system 00:07: ioport range 0x3f6-0x3f7 has been reserved
system 00:07: ioport range 0x400-0x4cf has been reserved
system 00:07: ioport range 0x4d2-0x57f has been reserved
system 00:07: ioport range 0x580-0x677 has been reserved
system 00:07: ioport range 0x680-0x777 has been reserved
system 00:07: ioport range 0x780-0x7bb has been reserved
system 00:07: ioport range 0x7c0-0x7ff has been reserved
system 00:07: ioport range 0x8e0-0x8ff has been reserved
system 00:07: ioport range 0x900-0x9fe has been reserved
system 00:07: ioport range 0xa00-0xafe has been reserved
system 00:07: ioport range 0xb00-0xbfe has been reserved
system 00:07: ioport range 0xc80-0xcaf has been reserved
system 00:07: ioport range 0xcb0-0xcbf has been reserved
system 00:07: ioport range 0xcc0-0xcf7 has been reserved
system 00:07: ioport range 0xd00-0xdfe has been reserved
system 00:07: ioport range 0xe00-0xefe has been reserved
system 00:07: ioport range 0xf00-0xffe has been reserved
system 00:07: ioport range 0x2000-0x20fe has been reserved
system 00:07: ioport range 0x2100-0x21fe has been reserved
system 00:07: ioport range 0x2200-0x22fe has been reserved
system 00:07: ioport range 0x2300-0x23fe has been reserved
system 00:07: ioport range 0x2400-0x24fe has been reserved
system 00:07: ioport range 0x2500-0x25fe has been reserved
system 00:07: ioport range 0x2600-0x26fe has been reserved
system 00:07: ioport range 0x2700-0x27fe has been reserved
system 00:07: ioport range 0x2800-0x28fe has been reserved
system 00:07: ioport range 0x2900-0x29fe has been reserved
system 00:07: ioport range 0x2a00-0x2afe has been reserved
system 00:07: ioport range 0x2b00-0x2bfe has been reserved
system 00:07: ioport range 0x2c00-0x2cfe has been reserved
system 00:07: ioport range 0x2d00-0x2dfe has been reserved
system 00:07: ioport range 0x2e00-0x2efe has been reserved
system 00:07: ioport range 0x2f00-0x2ffe has been reserved
system 00:07: ioport range 0x5000-0x50fe has been reserved
system 00:07: ioport range 0x5100-0x51fe has been reserved
system 00:07: ioport range 0x5200-0x52fe has been reserved
system 00:07: ioport range 0x5300-0x53fe has been reserved
system 00:07: ioport range 0x5400-0x54fe has been reserved
system 00:07: ioport range 0x5500-0x55fe has been reserved
system 00:07: ioport range 0x5600-0x56fe has been reserved
system 00:07: ioport range 0x5700-0x57fe has been reserved
system 00:07: ioport range 0x5800-0x58fe has been reserved
system 00:07: ioport range 0x5900-0x59fe has been reserved
system 00:07: ioport range 0x5a00-0x5afe has been reserved
system 00:07: ioport range 0x5b00-0x5bfe has been reserved
system 00:07: ioport range 0x5c00-0x5cfe has been reserved
system 00:07: ioport range 0x5d00-0x5dfe has been reserved
system 00:07: ioport range 0x5e00-0x5efe has been reserved
system 00:07: ioport range 0x5f00-0x5ffe has been reserved
system 00:07: ioport range 0x6000-0x60fe has been reserved
system 00:07: ioport range 0x6100-0x61fe has been reserved
system 00:07: ioport range 0x6200-0x62fe has been reserved
system 00:07: ioport range 0x6300-0x63fe has been reserved
system 00:07: ioport range 0x6400-0x64fe has been reserved
system 00:07: ioport range 0x6500-0x65fe has been reserved
system 00:07: ioport range 0x6600-0x66fe has been reserved
system 00:07: ioport range 0x6700-0x67fe has been reserved
system 00:07: ioport range 0x6800-0x68fe has been reserved
system 00:07: ioport range 0x6900-0x69fe has been reserved
system 00:07: ioport range 0x6a00-0x6afe has been reserved
system 00:07: ioport range 0x6b00-0x6bfe has been reserved
system 00:07: ioport range 0x6c00-0x6cfe has been reserved
system 00:07: ioport range 0x6d00-0x6dfe has been reserved
system 00:07: ioport range 0x6e00-0x6efe has been reserved
system 00:07: ioport range 0x6f00-0x6ffe has been reserved
system 00:07: ioport range 0xa000-0xa0fe has been reserved
system 00:07: ioport range 0xa100-0xa1fe has been reserved
system 00:07: ioport range 0xa200-0xa2fe has been reserved
system 00:07: ioport range 0xa300-0xa3fe has been reserved
system 00:07: ioport range 0xa400-0xa4fe has been reserved
system 00:07: ioport range 0xa500-0xa5fe has been reserved
system 00:07: ioport range 0xa600-0xa6fe has been reserved
system 00:07: ioport range 0xa700-0xa7fe has been reserved
system 00:07: ioport range 0xa800-0xa8fe has been reserved
system 00:07: ioport range 0xa900-0xa9fe has been reserved
system 00:07: ioport range 0xaa00-0xaafe has been reserved
system 00:07: ioport range 0xab00-0xabfe has been reserved
system 00:07: ioport range 0xac00-0xacfe has been reserved
system 00:07: ioport range 0xad00-0xadfe has been reserved
system 00:07: ioport range 0xae00-0xaefe has been reserved
system 00:07: ioport range 0xaf00-0xaffe has been reserved
system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xd000-0xdfff
pci 0000:00:01.0:   MEM window: 0xdfd00000-0xdfefffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0xdfc00000-0xdfcfffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
pci 0000:00:1e.0:   MEM window: 0xdfb00000-0xdfbfffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xdfd00000-0xdfefffff]
bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0xdfc00000-0xdfcfffff]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xc000-0xcfff]
bus: 03 index 1 mmio: [0xdfb00000-0xdfbfffff]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1695k freed
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
GFS2 (built Jan 23 2009 12:16:00) installed
msgmni has been set to 1715
alg: No test for stdrng (krng)
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xf8500000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:9ea4
vesafb: pmi: set display start = c00c9f46, set palette = c00ca004
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [VBTN]
processor ACPI_CPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /class/input/input2
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k9
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.8
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: ST3808110AS, 3.ADJ, max UDMA/133
ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX310S, VDK2, max UDMA/100
ata2.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      ST3808110AS      3.AD PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM            SONY     CDRWDVD CRX310S  VDK2 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ata_piix 0000:00:1f.5: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdffdac00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-3: configuration #1 chosen from 1 choice
PNP: No PS/2 controller found. Probing ports directly.
scsi6 : SCSI emulation for USB Mass Storage devices
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-3: New USB device found, idVendor=05dc, idProduct=a575
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: JD FIREFLY
usb 1-3: Manufacturer: LEXAR
usb 1-3: SerialNumber: 302AC702113544300507
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    793 MB/s
raid6: int32x2    810 MB/s
raid6: int32x4    731 MB/s
raid6: int32x8    547 MB/s
raid6: mmxx1     1855 MB/s
raid6: mmxx2     1917 MB/s
raid6: sse1x1    1085 MB/s
raid6: sse1x2    1094 MB/s
raid6: sse2x1    2208 MB/s
raid6: sse2x2    2028 MB/s
raid6: using algorithm sse2x1 (2208 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
usb 1-4: new high speed USB device using ehci_hcd and address 5
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 376k freed
usb 1-4: configuration #1 chosen from 1 choice
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
aufs 20081208
usb 1-4: New USB device found, idVendor=14b2, idProduct=3c27
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11 n WLAN
usb 1-4: Manufacturer: Ralink
usb 1-4: SerialNumber: 1.0
fuse init (API version 7.10)
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input3
generic-usb 0003:0461:4D15.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
usb 3-1: New USB device found, idVendor=0461, idProduct=4d15
usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=046d, idProduct=08b2
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 7-2: new low speed USB device using uhci_hcd and address 2
usb 7-2: configuration #1 chosen from 1 choice
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input4
microsoft 0003:045E:00F9.0002: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-2/input0
microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input5
microsoft 0003:045E:00F9.0003: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-2/input1
usb 7-2: New USB device found, idVendor=045e, idProduct=00f9
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Microsoft Wireless Desktop Receiver 3.1
usb 7-2: Manufacturer: Microsft
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     LEXAR    JD FIREFLY       1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 3963904 512-byte hardware sectors: (2.02 GB/1.88 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 3963904 512-byte hardware sectors: (2.02 GB/1.88 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
MINIX-fs: blocksize too small for device
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
UDF-fs: No partition found (1)
(1638,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(1658,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
NTFS volume version 3.1.
UDF-fs: No partition found (1)
(1790,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(1810,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
input: PC Speaker as /class/input/input6
lp: driver loaded but no devices found
Linux agpgart interface v0.103
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
NTFS volume version 3.1.
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
e1000e 0000:00:19.0: setting latency timer to 64
0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:41:0c:62
0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 7, PBA No: 1021ff-0ff
Linux video capture interface: v2.00
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc: Logitech QuickCam 4000 Pro USB webcam detected.
pwc: Registered as /dev/video0.
usbcore: registered new interface driver Philips webcam
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /class/input/input7
usbcore: registered new interface driver snd-usb-audio
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining

Pour les mise a jours,j'ai trouver une se ratachant a ma carte wifi elle va comme suis avec les informations néssaissaire...


Ralink - Network - Airlink101 Wireless USB Adapter

Installation date: &#8206;2010-&#8206;01-&#8206;12 18:45

Installation status: Successful

Update type: Important

Ralink Network software update released in May, 2009

More information:
http://winqual.microsoft.com/support/?driverid=20270032

Help and Support:
http://support.microsoft.com/select/?target=hub



Donc j'ai testé aussi ce que qwertazert  ma proposer avec duel usb donc j'ai constaté que rear duel usb et rear quad usb faisai parti des usb controler de ma carte mere et puis que front usb usb fat parti des usb frontal de ma boite d'ordinateur et j'ai tenter de mettre a off le front usb mais sans succes enfin voila j'attend de vos nouvelles sur les code d'erreur a tentot!!!Puis a la base j'avai pas de ralong pour ma carte wifi mais j'ai tester avec rallonge sans succes aussi ainssi que j'ai essayer sur d'autre ports usb et sans succes encore grrr quelle migraine la...

Dernière modification par CruorVinco (19-01-2010 22:08:49)


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#46 19-01-2010 22:20:35

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

merci de votre réponce d'avance les  mecs:P


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#47 19-01-2010 22:47:24

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

usb 1-4: New USB device found, idVendor=14b2, idProduct=3c27
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11 n WLAN
usb 1-4: Manufacturer: Ralink
usb 1-4: SerialNumber: 1.0

Bon, au moins il détecte ta carte, c'est pas le port USB qui est en faute...
Mmmmh, 14b2:3c27 apparemment c'est du Ralink 2870. Il faudrait vérifier que le driver est bien chargé, tu saurais nous donner le résultat de "lsmod | grep 2870" ? Et si ca répond rien, la sortie de "lsmod | grep rt" ?

Sinon, tu peux aussi essayer de taper "modprobe rt2870sta" pour charger le driver au pire il te répond qu'il est déjà chargé big_smile après, tu tapes "iwconfig" pour voir si ta carte est apparue, et sinon, un autre "dmesg" pour voir s'il y a pas un message d'erreur là dedans (les dernières lignes suffisent)

Juste une précision, t'es bien en LiveUSB pur ? Pas de persistance, de changement sauvegardé ni rien ?! Moi je ferais quand même un essai avec BT4, pour être sûr hmm

Hors Ligne

#48 19-01-2010 23:21:04

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

oui je suis bien en mode usb pur sans sauvegarde!!
e vais essayer tes commande et je poste sa par la suite je re dans quelques minutes


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#49 19-01-2010 23:34:39

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

merde att je revien j'ai pas marquer le bon modprobe ><

Dernière modification par CruorVinco (19-01-2010 23:35:44)


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#50 19-01-2010 23:45:58

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

Ok alors voila ce que tes commandes m'on donné...

bt ~ # lsmod | grep 2870
bt ~ # lsmod | grep rt
iTCO_vendor_support     6788  1 iTCO_wdt
agpgart                30024  1 intel_agp
parport_pc             26788  0
parport                31596  2 lp,parport_pc
bt ~ # modprobe rt 2870sta
FATAL: Module rt not found.
bt ~ # iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

bt ~ # dmesg
]
pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfecf]
pci 0000:00:1f.2: reg 24 io port: [0xeca0-0xecaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xdffdab00-0xdffdabff]
pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
pci 0000:00:1f.5: reg 10 io port: [0xfe40-0xfe47]
pci 0000:00:1f.5: reg 14 io port: [0xfe50-0xfe53]
pci 0000:00:1f.5: reg 18 io port: [0xfe60-0xfe67]
pci 0000:00:1f.5: reg 1c io port: [0xfe70-0xfe73]
pci 0000:00:1f.5: reg 20 io port: [0xfed0-0xfedf]
pci 0000:00:1f.5: reg 24 io port: [0xecb0-0xecbf]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xdfdf0000-0xdfdfffff]
pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xdfe00000-0xdfe1ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 64bit mmio: [0xdfdec000-0xdfdeffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
pci 0000:03:03.0: reg 10 32bit mmio: [0xdfbf0000-0xdfbfffff]
pci 0000:03:03.0: reg 14 io port: [0xccf8-0xccff]
pci 0000:03:03.0: PME# supported from D3hot D3cold
pci 0000:03:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
Switched to high resolution mode on CPU 0
pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:06: iomem range 0x0-0x9ffff could not be reserved
system 00:06: iomem range 0x100000-0xffffff could not be reserved
system 00:06: iomem range 0x1000000-0x9fe51bff could not be reserved
system 00:06: iomem range 0xf0000-0xfffff could not be reserved
system 00:06: iomem range 0xc0000-0xd3fff could not be reserved
system 00:06: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:06: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:06: iomem range 0xffc00000-0xffffffff has been reserved
system 00:07: ioport range 0x100-0x1fe has been reserved
system 00:07: ioport range 0x200-0x277 has been reserved
system 00:07: ioport range 0x280-0x2e7 has been reserved
system 00:07: ioport range 0x2e8-0x2ef has been reserved
system 00:07: ioport range 0x2f0-0x2f7 has been reserved
system 00:07: ioport range 0x2f8-0x2ff has been reserved
system 00:07: ioport range 0x300-0x377 has been reserved
system 00:07: ioport range 0x380-0x3bb has been reserved
system 00:07: ioport range 0x3c0-0x3e7 has been reserved
system 00:07: ioport range 0x3f6-0x3f7 has been reserved
system 00:07: ioport range 0x400-0x4cf has been reserved
system 00:07: ioport range 0x4d2-0x57f has been reserved
system 00:07: ioport range 0x580-0x677 has been reserved
system 00:07: ioport range 0x680-0x777 has been reserved
system 00:07: ioport range 0x780-0x7bb has been reserved
system 00:07: ioport range 0x7c0-0x7ff has been reserved
system 00:07: ioport range 0x8e0-0x8ff has been reserved
system 00:07: ioport range 0x900-0x9fe has been reserved
system 00:07: ioport range 0xa00-0xafe has been reserved
system 00:07: ioport range 0xb00-0xbfe has been reserved
system 00:07: ioport range 0xc80-0xcaf has been reserved
system 00:07: ioport range 0xcb0-0xcbf has been reserved
system 00:07: ioport range 0xcc0-0xcf7 has been reserved
system 00:07: ioport range 0xd00-0xdfe has been reserved
system 00:07: ioport range 0xe00-0xefe has been reserved
system 00:07: ioport range 0xf00-0xffe has been reserved
system 00:07: ioport range 0x2000-0x20fe has been reserved
system 00:07: ioport range 0x2100-0x21fe has been reserved
system 00:07: ioport range 0x2200-0x22fe has been reserved
system 00:07: ioport range 0x2300-0x23fe has been reserved
system 00:07: ioport range 0x2400-0x24fe has been reserved
system 00:07: ioport range 0x2500-0x25fe has been reserved
system 00:07: ioport range 0x2600-0x26fe has been reserved
system 00:07: ioport range 0x2700-0x27fe has been reserved
system 00:07: ioport range 0x2800-0x28fe has been reserved
system 00:07: ioport range 0x2900-0x29fe has been reserved
system 00:07: ioport range 0x2a00-0x2afe has been reserved
system 00:07: ioport range 0x2b00-0x2bfe has been reserved
system 00:07: ioport range 0x2c00-0x2cfe has been reserved
system 00:07: ioport range 0x2d00-0x2dfe has been reserved
system 00:07: ioport range 0x2e00-0x2efe has been reserved
system 00:07: ioport range 0x2f00-0x2ffe has been reserved
system 00:07: ioport range 0x5000-0x50fe has been reserved
system 00:07: ioport range 0x5100-0x51fe has been reserved
system 00:07: ioport range 0x5200-0x52fe has been reserved
system 00:07: ioport range 0x5300-0x53fe has been reserved
system 00:07: ioport range 0x5400-0x54fe has been reserved
system 00:07: ioport range 0x5500-0x55fe has been reserved
system 00:07: ioport range 0x5600-0x56fe has been reserved
system 00:07: ioport range 0x5700-0x57fe has been reserved
system 00:07: ioport range 0x5800-0x58fe has been reserved
system 00:07: ioport range 0x5900-0x59fe has been reserved
system 00:07: ioport range 0x5a00-0x5afe has been reserved
system 00:07: ioport range 0x5b00-0x5bfe has been reserved
system 00:07: ioport range 0x5c00-0x5cfe has been reserved
system 00:07: ioport range 0x5d00-0x5dfe has been reserved
system 00:07: ioport range 0x5e00-0x5efe has been reserved
system 00:07: ioport range 0x5f00-0x5ffe has been reserved
system 00:07: ioport range 0x6000-0x60fe has been reserved
system 00:07: ioport range 0x6100-0x61fe has been reserved
system 00:07: ioport range 0x6200-0x62fe has been reserved
system 00:07: ioport range 0x6300-0x63fe has been reserved
system 00:07: ioport range 0x6400-0x64fe has been reserved
system 00:07: ioport range 0x6500-0x65fe has been reserved
system 00:07: ioport range 0x6600-0x66fe has been reserved
system 00:07: ioport range 0x6700-0x67fe has been reserved
system 00:07: ioport range 0x6800-0x68fe has been reserved
system 00:07: ioport range 0x6900-0x69fe has been reserved
system 00:07: ioport range 0x6a00-0x6afe has been reserved
system 00:07: ioport range 0x6b00-0x6bfe has been reserved
system 00:07: ioport range 0x6c00-0x6cfe has been reserved
system 00:07: ioport range 0x6d00-0x6dfe has been reserved
system 00:07: ioport range 0x6e00-0x6efe has been reserved
system 00:07: ioport range 0x6f00-0x6ffe has been reserved
system 00:07: ioport range 0xa000-0xa0fe has been reserved
system 00:07: ioport range 0xa100-0xa1fe has been reserved
system 00:07: ioport range 0xa200-0xa2fe has been reserved
system 00:07: ioport range 0xa300-0xa3fe has been reserved
system 00:07: ioport range 0xa400-0xa4fe has been reserved
system 00:07: ioport range 0xa500-0xa5fe has been reserved
system 00:07: ioport range 0xa600-0xa6fe has been reserved
system 00:07: ioport range 0xa700-0xa7fe has been reserved
system 00:07: ioport range 0xa800-0xa8fe has been reserved
system 00:07: ioport range 0xa900-0xa9fe has been reserved
system 00:07: ioport range 0xaa00-0xaafe has been reserved
system 00:07: ioport range 0xab00-0xabfe has been reserved
system 00:07: ioport range 0xac00-0xacfe has been reserved
system 00:07: ioport range 0xad00-0xadfe has been reserved
system 00:07: ioport range 0xae00-0xaefe has been reserved
system 00:07: ioport range 0xaf00-0xaffe has been reserved
system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xd000-0xdfff
pci 0000:00:01.0:   MEM window: 0xdfd00000-0xdfefffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0xdfc00000-0xdfcfffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
pci 0000:00:1e.0:   MEM window: 0xdfb00000-0xdfbfffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xdfd00000-0xdfefffff]
bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0xdfc00000-0xdfcfffff]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xc000-0xcfff]
bus: 03 index 1 mmio: [0xdfb00000-0xdfbfffff]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1695k freed
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
GFS2 (built Jan 23 2009 12:16:00) installed
msgmni has been set to 1715
alg: No test for stdrng (krng)
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xf8500000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:9ea4
vesafb: pmi: set display start = c00c9f46, set palette = c00ca004
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [VBTN]
processor ACPI_CPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /class/input/input2
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k9
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.8
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: ST3808110AS, 3.ADJ, max UDMA/133
ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX310S, VDK2, max UDMA/100
ata2.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      ST3808110AS      3.AD PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM            SONY     CDRWDVD CRX310S  VDK2 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ata_piix 0000:00:1f.5: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdffdac00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb 1-3: New USB device found, idVendor=05dc, idProduct=a575
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: JD FIREFLY
usb 1-3: Manufacturer: LEXAR
usb 1-3: SerialNumber: 302AC702113544300507
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    793 MB/s
raid6: int32x2    810 MB/s
raid6: int32x4    731 MB/s
raid6: int32x8    555 MB/s
raid6: mmxx1     1856 MB/s
raid6: mmxx2     1917 MB/s
raid6: sse1x1    1086 MB/s
raid6: sse1x2    1094 MB/s
raid6: sse2x1    2208 MB/s
raid6: sse2x2    2028 MB/s
raid6: using algorithm sse2x1 (2208 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
usb 1-4: new high speed USB device using ehci_hcd and address 4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 376k freed
usb 1-4: configuration #1 chosen from 1 choice
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
aufs 20081208
usb 1-4: New USB device found, idVendor=14b2, idProduct=3c27
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11 n WLAN
usb 1-4: Manufacturer: Ralink
usb 1-4: SerialNumber: 1.0
fuse init (API version 7.10)
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input3
generic-usb 0003:0461:4D15.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
usb 3-1: New USB device found, idVendor=0461, idProduct=4d15
usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-1: New USB device found, idVendor=046d, idProduct=08b2
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input4
microsoft 0003:045E:00F9.0002: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-2/input0
microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input5
microsoft 0003:045E:00F9.0003: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-2/input1
usb 7-2: New USB device found, idVendor=045e, idProduct=00f9
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Microsoft Wireless Desktop Receiver 3.1
usb 7-2: Manufacturer: Microsft
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     LEXAR    JD FIREFLY       1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 3963904 512-byte hardware sectors: (2.02 GB/1.88 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 3963904 512-byte hardware sectors: (2.02 GB/1.88 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
MINIX-fs: blocksize too small for device
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
UDF-fs: No partition found (1)
(1638,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(1658,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
NTFS volume version 3.1.
UDF-fs: No partition found (1)
(1790,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(1810,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
input: PC Speaker as /class/input/input6
lp: driver loaded but no devices found
Linux agpgart interface v0.103
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
NTFS volume version 3.1.
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
e1000e 0000:00:19.0: setting latency timer to 64
0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:41:0c:62
0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 7, PBA No: 1021ff-0ff
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /class/input/input7
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
Linux video capture interface: v2.00
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc: Logitech QuickCam 4000 Pro USB webcam detected.
pwc: Registered as /dev/video0.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver Philips webcam
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining
bt ~ #

J'ai crue remarquer que en tapant la commande''modprobe rt2870sta" il ne trouve pas mon driver c'est cela?
comemnt regler cela car j'ai bel et bien installer mon driver je le confime et a plusieur reprise désinstaller et réinstaller!!!

PS:Je vais au dep chercher des clope je re quelques minutes


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

Annonce

Visitez la boutique Wifi-highpower.com, votre revendeur agr Alfa Network: du matriel Wifi slectionn, cartes Wifi USB Awus036h et Awus036nh, antennes omnis, yagis, panel, amplis wifi, accessoires...

Sujets similaires

Pied de page des forums


Le coin des bonnes affaires, achats informatiques:


|   Alfa 1000 mW AWUS036H   |    Linksys WRT54GL   |    Misco, informatique   |   
 |    Ebay   |    PC portables   |    PC Gamers & Tuning   |    Cles USB   |   
|   Disques durs externes 2 To   |   
|   Wifi-highpower.com   |   


Server Stats - [ Generated in 0.078 seconds ]   Forum Stat - [ Most users ever online on the forum was : 150 on 20-09-2009 17:06:59 ]