Crack-wifi.com FORUM

LE FORUM DU SITE

Wifi, Backtrack, crack WEP et WPA...

Vous n'êtes pas identifié(e).  

Annonce

Visitez la boutique Wifi-highpower.com, votre revendeur agr Alfa Network: du matriel Wifi slectionn, cartes Wifi USB Awus036h et Awus036nh, antennes omnis, yagis, panel, amplis wifi, accessoires...

#51 19-01-2010 23:52:48

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

Où est-ce que tu as vu un espace dans le nom du module, toi ? big_smile c'est "rt2870sta" en 1 mot wink
D'ailleurs pour être sûr, utilise la touche TAB (celle avce les 2 flèches) pour qu'il essaie de compléter lui-même le nom du module --> tu tapes "modprobe rt2[TAB]", et s'il affiche rien c'est qu'il y a plusieurs possibilités, donc t'appuies 2 fois sur TAB : "modprobe rt2[TAB][TAB]" et tu vois ce qu'il te propose smile

Au passage, c'est curieux qu'il ne charge pas le pilote, mais ca expliquerait pourquoi ta carte WiFi n'est pas reconnue... hmm

Hors Ligne

Annonce

Visitez la boutique Wifi-highpower.com, votre revendeur agr Alfa Network: du matriel Wifi slectionn, cartes Wifi USB Awus036h et Awus036nh, antennes omnis, yagis, panel, amplis wifi, accessoires...

#52 20-01-2010 00:12:29

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

ouai voila bon je vais regarder sa de plus pret et je te revien tongue


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#53 20-01-2010 00:25:03

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

alors voila suite apres le dernier message j'ai tenter et ceci dis sa m'a donner cela...

bt ~ # lsmod |grep 2870
bt ~ # lsmod |grep rt
iTCO_vendor_support     6788  1 iTCO_wdt
agpgart                30024  1 intel_agp
parport_pc             26788  0
parport                31596  2 lp,parport_pc
bt ~ # modprobe rt2870sta
FATAL: Module rt2870sta not found.
bt ~ # modprobe rt2870sta
FATAL: Module rt2870sta not found.
bt ~ #
Display all 2821 possibilities? (y or n)
!
./
.autopsy_cases/
.autoscan-network/
.bitrock/
.config/
.fluxbox/
.fullcircle/
.gconf/
.gconfd/
.gnome2/
.gnome2_private/
.java/
.kde/
.local/
.macromedia/
.madedit/
.maltego/
.mcop/
.mozilla/
.msf3/
.qt/
.ssh/
.subversion/
--More--

j'aimerrai souligner un grand merci de l'attention que vous avez envers moi et du temps que vous me consacrer tongue
j'attend de nouvelles directives...


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#54 20-01-2010 00:47:17

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

Damn, il trouve même pas le module rt2870 ?! C'est quoi cette blague ? mad

Je viens de passer sous BT3 (standard, pas Fusion) juste pour toi, je viens de faire le test et ca marche, il trouve le rt2870sta... Ils ont quand même pas viré des pilotes ?!

Bon, heu... Ben on va voir ce qu'il y a d'autre, hein... [c]modprobe -l | grep 2870[/c], s'il te plait ? Et s'il ne trouve rien, [c]modprobe -l | grep wireless[/c]...
Ce que tu peux aussi faire, c'est essayer avec airdriver-ng. Pour ca faut d'abord mettre Aircrack à jour :
- [c]cd /pentest/fast-track[/c]
- [c]python fast-track.py -i[/c]
- "Updates" (1) > "Aircrack-NG" (3)
- tu attends qu'il ai fini, puis "10" "10" pour quitter
- tu tapes [c]airdriver-ng loader[/c] et tu me donnes le résultat
- tu tapes [c]airdriver-ng installed[/c] et tu regardes les Ralink dans la liste, normalement y a pas le 2870 mais on va essayer avec le 2570 (numéro 25 normalement)
- donc tu tapes [c]airdriver-ng load 25[/c] et tu pries
- s'il ne t'affiche pas d'erreur, tape iwconfig et croise les doigts
- si ta carte n'est toujours pas là, donne moi les dernières lignes (10 max) de dmesg

Pour ton info, il est presque 1:00 AM sur ce continent-ci, donc je te répondrai sans doute que demain smile (dans 8 heures, en gros)

Dernière modification par antares145 (20-01-2010 00:48:30)

Hors Ligne

#55 20-01-2010 00:54:53

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

hum je ne peu pas  mettre a jour airdriver car je ne peu meme pas me conecter sous backtrack >< !!pour le virage de pilotes je crois pas car j'etai sur le meme live usb avec la meme version de backtrack3 fusion pour mon premier crackage de wep de ma conection alors je ne crois pas qu'il ont viré les pilotes....

Mais je vais tester tes premieres commandes et je t'en dis des nouvelles=D

Dernière modification par CruorVinco (20-01-2010 01:25:16)


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#56 20-01-2010 01:22:16

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

alors voila ce que ''modprobe -1 | grep 2870'' et modprobe -l | grep wireless... donnent!?
J'ai fait le ''dmesg'' la fin quand meme!!

bt ~ # modprobe -1 | grep 2870
modprobe: invalid option -- 1
Usage: modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] <modname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
bt ~ # modprobe -1 | grep wireless
modprobe: invalid option -- 1
Usage: modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] <modname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
bt ~ # dmesg
]
pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfecf]
pci 0000:00:1f.2: reg 24 io port: [0xeca0-0xecaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xdffdab00-0xdffdabff]
pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
pci 0000:00:1f.5: reg 10 io port: [0xfe40-0xfe47]
pci 0000:00:1f.5: reg 14 io port: [0xfe50-0xfe53]
pci 0000:00:1f.5: reg 18 io port: [0xfe60-0xfe67]
pci 0000:00:1f.5: reg 1c io port: [0xfe70-0xfe73]
pci 0000:00:1f.5: reg 20 io port: [0xfed0-0xfedf]
pci 0000:00:1f.5: reg 24 io port: [0xecb0-0xecbf]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xdfdf0000-0xdfdfffff]
pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xdfe00000-0xdfe1ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 64bit mmio: [0xdfdec000-0xdfdeffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
pci 0000:03:03.0: reg 10 32bit mmio: [0xdfbf0000-0xdfbfffff]
pci 0000:03:03.0: reg 14 io port: [0xccf8-0xccff]
pci 0000:03:03.0: PME# supported from D3hot D3cold
pci 0000:03:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
Switched to high resolution mode on CPU 0
pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:06: iomem range 0x0-0x9ffff could not be reserved
system 00:06: iomem range 0x100000-0xffffff could not be reserved
system 00:06: iomem range 0x1000000-0x9fe51bff could not be reserved
system 00:06: iomem range 0xf0000-0xfffff could not be reserved
system 00:06: iomem range 0xc0000-0xd3fff could not be reserved
system 00:06: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:06: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:06: iomem range 0xffc00000-0xffffffff has been reserved
system 00:07: ioport range 0x100-0x1fe has been reserved
system 00:07: ioport range 0x200-0x277 has been reserved
system 00:07: ioport range 0x280-0x2e7 has been reserved
system 00:07: ioport range 0x2e8-0x2ef has been reserved
system 00:07: ioport range 0x2f0-0x2f7 has been reserved
system 00:07: ioport range 0x2f8-0x2ff has been reserved
system 00:07: ioport range 0x300-0x377 has been reserved
system 00:07: ioport range 0x380-0x3bb has been reserved
system 00:07: ioport range 0x3c0-0x3e7 has been reserved
system 00:07: ioport range 0x3f6-0x3f7 has been reserved
system 00:07: ioport range 0x400-0x4cf has been reserved
system 00:07: ioport range 0x4d2-0x57f has been reserved
system 00:07: ioport range 0x580-0x677 has been reserved
system 00:07: ioport range 0x680-0x777 has been reserved
system 00:07: ioport range 0x780-0x7bb has been reserved
system 00:07: ioport range 0x7c0-0x7ff has been reserved
system 00:07: ioport range 0x8e0-0x8ff has been reserved
system 00:07: ioport range 0x900-0x9fe has been reserved
system 00:07: ioport range 0xa00-0xafe has been reserved
system 00:07: ioport range 0xb00-0xbfe has been reserved
system 00:07: ioport range 0xc80-0xcaf has been reserved
system 00:07: ioport range 0xcb0-0xcbf has been reserved
system 00:07: ioport range 0xcc0-0xcf7 has been reserved
system 00:07: ioport range 0xd00-0xdfe has been reserved
system 00:07: ioport range 0xe00-0xefe has been reserved
system 00:07: ioport range 0xf00-0xffe has been reserved
system 00:07: ioport range 0x2000-0x20fe has been reserved
system 00:07: ioport range 0x2100-0x21fe has been reserved
system 00:07: ioport range 0x2200-0x22fe has been reserved
system 00:07: ioport range 0x2300-0x23fe has been reserved
system 00:07: ioport range 0x2400-0x24fe has been reserved
system 00:07: ioport range 0x2500-0x25fe has been reserved
system 00:07: ioport range 0x2600-0x26fe has been reserved
system 00:07: ioport range 0x2700-0x27fe has been reserved
system 00:07: ioport range 0x2800-0x28fe has been reserved
system 00:07: ioport range 0x2900-0x29fe has been reserved
system 00:07: ioport range 0x2a00-0x2afe has been reserved
system 00:07: ioport range 0x2b00-0x2bfe has been reserved
system 00:07: ioport range 0x2c00-0x2cfe has been reserved
system 00:07: ioport range 0x2d00-0x2dfe has been reserved
system 00:07: ioport range 0x2e00-0x2efe has been reserved
system 00:07: ioport range 0x2f00-0x2ffe has been reserved
system 00:07: ioport range 0x5000-0x50fe has been reserved
system 00:07: ioport range 0x5100-0x51fe has been reserved
system 00:07: ioport range 0x5200-0x52fe has been reserved
system 00:07: ioport range 0x5300-0x53fe has been reserved
system 00:07: ioport range 0x5400-0x54fe has been reserved
system 00:07: ioport range 0x5500-0x55fe has been reserved
system 00:07: ioport range 0x5600-0x56fe has been reserved
system 00:07: ioport range 0x5700-0x57fe has been reserved
system 00:07: ioport range 0x5800-0x58fe has been reserved
system 00:07: ioport range 0x5900-0x59fe has been reserved
system 00:07: ioport range 0x5a00-0x5afe has been reserved
system 00:07: ioport range 0x5b00-0x5bfe has been reserved
system 00:07: ioport range 0x5c00-0x5cfe has been reserved
system 00:07: ioport range 0x5d00-0x5dfe has been reserved
system 00:07: ioport range 0x5e00-0x5efe has been reserved
system 00:07: ioport range 0x5f00-0x5ffe has been reserved
system 00:07: ioport range 0x6000-0x60fe has been reserved
system 00:07: ioport range 0x6100-0x61fe has been reserved
system 00:07: ioport range 0x6200-0x62fe has been reserved
system 00:07: ioport range 0x6300-0x63fe has been reserved
system 00:07: ioport range 0x6400-0x64fe has been reserved
system 00:07: ioport range 0x6500-0x65fe has been reserved
system 00:07: ioport range 0x6600-0x66fe has been reserved
system 00:07: ioport range 0x6700-0x67fe has been reserved
system 00:07: ioport range 0x6800-0x68fe has been reserved
system 00:07: ioport range 0x6900-0x69fe has been reserved
system 00:07: ioport range 0x6a00-0x6afe has been reserved
system 00:07: ioport range 0x6b00-0x6bfe has been reserved
system 00:07: ioport range 0x6c00-0x6cfe has been reserved
system 00:07: ioport range 0x6d00-0x6dfe has been reserved
system 00:07: ioport range 0x6e00-0x6efe has been reserved
system 00:07: ioport range 0x6f00-0x6ffe has been reserved
system 00:07: ioport range 0xa000-0xa0fe has been reserved
system 00:07: ioport range 0xa100-0xa1fe has been reserved
system 00:07: ioport range 0xa200-0xa2fe has been reserved
system 00:07: ioport range 0xa300-0xa3fe has been reserved
system 00:07: ioport range 0xa400-0xa4fe has been reserved
system 00:07: ioport range 0xa500-0xa5fe has been reserved
system 00:07: ioport range 0xa600-0xa6fe has been reserved
system 00:07: ioport range 0xa700-0xa7fe has been reserved
system 00:07: ioport range 0xa800-0xa8fe has been reserved
system 00:07: ioport range 0xa900-0xa9fe has been reserved
system 00:07: ioport range 0xaa00-0xaafe has been reserved
system 00:07: ioport range 0xab00-0xabfe has been reserved
system 00:07: ioport range 0xac00-0xacfe has been reserved
system 00:07: ioport range 0xad00-0xadfe has been reserved
system 00:07: ioport range 0xae00-0xaefe has been reserved
system 00:07: ioport range 0xaf00-0xaffe has been reserved
system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xd000-0xdfff
pci 0000:00:01.0:   MEM window: 0xdfd00000-0xdfefffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0xdfc00000-0xdfcfffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
pci 0000:00:1e.0:   MEM window: 0xdfb00000-0xdfbfffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xdfd00000-0xdfefffff]
bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0xdfc00000-0xdfcfffff]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xc000-0xcfff]
bus: 03 index 1 mmio: [0xdfb00000-0xdfbfffff]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1695k freed
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
GFS2 (built Jan 23 2009 12:16:00) installed
msgmni has been set to 1715
alg: No test for stdrng (krng)
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xf8500000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:9ea4
vesafb: pmi: set display start = c00c9f46, set palette = c00ca004
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [VBTN]
processor ACPI_CPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /class/input/input2
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k9
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.8
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: ST3808110AS, 3.ADJ, max UDMA/133
ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX310S, VDK2, max UDMA/100
ata2.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      ST3808110AS      3.AD PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM            SONY     CDRWDVD CRX310S  VDK2 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ata_piix 0000:00:1f.5: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdffdac00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.28.1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb 1-3: New USB device found, idVendor=05dc, idProduct=a575
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: JD FIREFLY
usb 1-3: Manufacturer: LEXAR
usb 1-3: SerialNumber: 302AC702113544300507
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    794 MB/s
raid6: int32x2    810 MB/s
raid6: int32x4    735 MB/s
raid6: int32x8    547 MB/s
raid6: mmxx1     1857 MB/s
raid6: mmxx2     1916 MB/s
raid6: sse1x1    1085 MB/s
raid6: sse1x2    1094 MB/s
raid6: sse2x1    2207 MB/s
raid6: sse2x2    2028 MB/s
raid6: using algorithm sse2x1 (2207 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
usb 1-4: new high speed USB device using ehci_hcd and address 4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 376k freed
usb 1-4: configuration #1 chosen from 1 choice
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
aufs 20081208
usb 1-4: New USB device found, idVendor=14b2, idProduct=3c27
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11 n WLAN
usb 1-4: Manufacturer: Ralink
usb 1-4: SerialNumber: 1.0
fuse init (API version 7.10)
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input3
generic-usb 0003:0461:4D15.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
usb 3-1: New USB device found, idVendor=0461, idProduct=4d15
usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-1: New USB device found, idVendor=046d, idProduct=08b2
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input4
microsoft 0003:045E:00F9.0002: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-2/input0
microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input5
microsoft 0003:045E:00F9.0003: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-2/input1
usb 7-2: New USB device found, idVendor=045e, idProduct=00f9
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Microsoft Wireless Desktop Receiver 3.1
usb 7-2: Manufacturer: Microsft
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     LEXAR    JD FIREFLY       1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 3963904 512-byte hardware sectors: (2.02 GB/1.88 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 3963904 512-byte hardware sectors: (2.02 GB/1.88 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
MINIX-fs: blocksize too small for device
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
UDF-fs: No partition found (1)
(1638,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(1658,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
NTFS volume version 3.1.
UDF-fs: No partition found (1)
(1790,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(1810,0):ocfs2_fill_super:642 ERROR: superblock probe failed!
GFS2: gfs2 mount does not exist
input: PC Speaker as /class/input/input6
lp: driver loaded but no devices found
Linux agpgart interface v0.103
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
NTFS volume version 3.1.
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
e1000e 0000:00:19.0: setting latency timer to 64
0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:41:0c:62
0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 7, PBA No: 1021ff-0ff
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /class/input/input7
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
Linux video capture interface: v2.00
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc: Logitech QuickCam 4000 Pro USB webcam detected.
pwc: Registered as /dev/video0.
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver Philips webcam
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
mtrr: type mismatch for c0000000,1000000 old: write-back new: write-combining
bt ~ #

si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#57 20-01-2010 01:27:09

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

Avec un peu de logique tu aurais remarqué que "modprobe -1 (<-- UN)" n'est pas une option reconnue, et que donc c'est bien un "modprobe -l | grep 2870" que je demandais, avec un L minuscule comme Liste (des modules). Modprobe permet de charger un pilote, comme je sais pas le nom qu'il a (vu que rt2870sta n'a pas l'air présent), je demande gentiment à modprobe la LISTE des pilotes qu'il connait.
Et comme cette liste est fort longue, je lui demande de filtrer uniquement les lignes qui contiennent le terme "2870", ou bien "wireless" s'il ne trouve pas. Pour ta culture, "|" s'appelle un pipe (tuyau en anglais), il sert à rediriger la sortie d'une commande vers l'entrée d'une autre, ici "grep". Et grep ne renvoie que les lignes qui contiennent un certain terme, CQFD wink

Tout ca pour dire que les manipulations que tu viens de faire ne m'apprennent absolument rien, et donc qu'elles ne font pas avancer le problème smile

Hors Ligne

#58 20-01-2010 01:36:48

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

alors voila pour tes commande mec...

bt ~ # modprobe -l | grep 2870
bt ~ # modprobe -l | grep wireless...
/lib/modules/2.6.28.1/kernel/net/wireless/cfg80211.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/zd1211rw/zd1211rw.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/zd1201.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/wl3501_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/wavelan_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/wavelan.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/strip.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/spectrum_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rtl8187.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rtl8180.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt61pci.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2500usb.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2500pci.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2400pci.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/rndis_wlan.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/ray_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/prism54/prism54.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/p54/p54usb.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/p54/p54pci.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/p54/p54common.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/orinoco_tmd.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/orinoco_plx.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/orinoco_pci.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/orinoco_nortel.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/orinoco_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/orinoco.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/netwave_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/mac80211_hwsim.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas_tf/libertas_tf_usb.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas_tf/libertas_tf.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas/usb8xxx.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas/libertas_sdio.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas/libertas_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas/libertas.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/iwlwifi/iwlagn.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/ipw2200.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/ipw2100.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/hostap/hostap_plx.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/hostap/hostap_pci.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/hostap/hostap_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/hostap/hostap.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/hermes_dld.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/hermes.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/b43legacy/b43legacy.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/b43/b43.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/atmel_pci.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/atmel_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/atmel.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/ath9k/ath9k.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/ath5k/ath5k.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/arlan.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/airo_cs.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/airo.ko
/lib/modules/2.6.28.1/kernel/drivers/net/wireless/adm8211.ko
/lib/modules/2.6.28.1/kernel/drivers/char/pcmcia/ipwireless/ipwireless.ko
bt ~ #

si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#59 20-01-2010 04:08:59

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

Bon en premieer lieu jai installer backtrack 4 final en live usb et jai reefectue les commande que tu mavai demander sur celui-ci et ca va comme suit...

[email protected]:~# modprobe rt2870sta
[email protected]:~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

ra0       Ralink STA

[email protected]:~# dmesg
Linux version 2.6.30.9 ([email protected]) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Tue Dec 1 21:51:08 EST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000009fe51c00 (usable)
 BIOS-e820: 000000009fe51c00 - 000000009fe53c00 (ACPI NVS)
 BIOS-e820: 000000009fe55c00 - 000000009fe57c00 (ACPI data)
 BIOS-e820: 000000009fe57c00 - 00000000a0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x9fe51 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask 000000000 write-back
  1 base 09FF00000 mask FFFF00000 uncachable
  2 base 0A0000000 mask FE0000000 uncachable
  3 base 0C0000000 mask FC0000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 7f7d7000 - 7ffffd95
Allocated new RAMDISK: 009e9000 - 01211d95
Move RAMDISK from 000000007f7d7000 - 000000007ffffd94 to 009e9000 - 01211d94
ACPI: RSDP 000febf0 00024 (v02 DELL  )
ACPI: XSDT 000fd086 00064 (v01 DELL    B8K     00000014 ASL  00000061)
ACPI: FACP 000fd1a6 000F4 (v03 DELL    B8K     00000014 ASL  00000061)
ACPI: DSDT fffd642b 033DC (v01   DELL    dt_ex 00001000 INTL 20050624)
ACPI: FACS 9fe51c00 00040
ACPI: SSDT fffd9ae5 0009C (v01   DELL    st_ex 00001000 INTL 20050624)
ACPI: APIC 000fd29a 00092 (v01 DELL    B8K     00000014 ASL  00000061)
ACPI: BOOT 000fd32c 00028 (v01 DELL    B8K     00000014 ASL  00000061)
ACPI: MCFG 000fd354 0003E (v01 DELL    B8K     00000014 ASL  00000061)
ACPI: HPET 000fd392 00038 (v01 DELL    B8K     00000014 ASL  00000061)
ACPI: DUMY 9fe55c00 00024 (v01 DELL    B8K     00000014 ASL  00000061)
ACPI: SLIC 000fd3ca 00176 (v01 DELL    B8K     00000014 ASL  00000061)
ACPI: Local APIC address 0xfee00000
1670MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 00009e4374]    TEXT DATA BSS ==> [0000100000 - 00009e4374]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [00009e5000 - 00009e81a4]              BRK ==> [00009e5000 - 00009e81a4]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [00009e9000 - 0001211d95]      NEW RAMDISK ==> [00009e9000 - 0001211d95]
  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00fe710] fe710
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0009fe51
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0009fe51
On node 0 totalpages: 654832
free_area_init_node: node 0, pgdat c08e7b40, node_mem_map c1212000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 3341 pages used for memmap
  HighMem zone: 424262 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 7 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at a4000000 (gap: a0000000:40000000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 11 pages at c261c000, static data 23068 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 649715
Kernel command line: initrd=/ubninit BOOT=casper boot=casper nopersistent rw quiet vga=0x317 BOOT_IMAGE=/ubnkern
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3058.969 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:0009fe51)
Memory: 2579176k/2619716k available (6103k kernel code, 39180k reserved, 2103k data, 432k init, 1710412k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4f000 - 0xfffff000   ( 704 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc090d000 - 0xc0979000   ( 432 kB)
      .data : 0xc06f5dad - 0xc0903a44   (2103 kB)
      .text : 0xc0100000 - 0xc06f5dad   (6103 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6120.85 BogoMIPS (lpj=10196563)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
using mwait in idle threads.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 3.06GHz stepping 09
Brought up 1 CPUs
Total of 1 processors activated (6120.85 BogoMIPS).
net_namespace: 980 bytes
Dell E520 series board detected. Selecting BIOS-method for reboots.
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  4888.800 MB/sec
xor: using function: pIII_sse (4888.800 MB/sec)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xdffe0000-0xdfffffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xdffdb000-0xdffdbfff]
pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f]
pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xdffdac00-0xdffdafff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xdffdc000-0xdffdffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfecf]
pci 0000:00:1f.2: reg 24 io port: [0xeca0-0xecaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xdffdab00-0xdffdabff]
pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
pci 0000:00:1f.5: reg 10 io port: [0xfe40-0xfe47]
pci 0000:00:1f.5: reg 14 io port: [0xfe50-0xfe53]
pci 0000:00:1f.5: reg 18 io port: [0xfe60-0xfe67]
pci 0000:00:1f.5: reg 1c io port: [0xfe70-0xfe73]
pci 0000:00:1f.5: reg 20 io port: [0xfed0-0xfedf]
pci 0000:00:1f.5: reg 24 io port: [0xecb0-0xecbf]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xdfdf0000-0xdfdfffff]
pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xdfe00000-0xdfe1ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 64bit mmio: [0xdfdec000-0xdfdeffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
pci 0000:03:03.0: reg 10 32bit mmio: [0xdfbf0000-0xdfbfffff]
pci 0000:03:03.0: reg 14 io port: [0xccf8-0xccff]
pci 0000:03:03.0: PME# supported from D3hot D3cold
pci 0000:03:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    911 MB/s
raid6: int32x2    814 MB/s
raid6: int32x4    808 MB/s
raid6: int32x8    632 MB/s
raid6: mmxx1     1905 MB/s
raid6: mmxx2     2204 MB/s
raid6: sse1x1    1068 MB/s
raid6: sse1x2    1953 MB/s
raid6: sse2x1    2251 MB/s
raid6: sse2x2    3103 MB/s
raid6: using algorithm sse2x2 (3103 MB/s)
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
Switched to high resolution mode on CPU 0
pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:06: iomem range 0x0-0x9ffff could not be reserved
system 00:06: iomem range 0x100000-0xffffff could not be reserved
system 00:06: iomem range 0x1000000-0x9fe51bff could not be reserved
system 00:06: iomem range 0xf0000-0xfffff could not be reserved
system 00:06: iomem range 0xc0000-0xd3fff could not be reserved
system 00:06: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:06: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:06: iomem range 0xffc00000-0xffffffff has been reserved
system 00:07: ioport range 0x100-0x1fe has been reserved
system 00:07: ioport range 0x200-0x277 has been reserved
system 00:07: ioport range 0x280-0x2e7 has been reserved
system 00:07: ioport range 0x2e8-0x2ef has been reserved
system 00:07: ioport range 0x2f0-0x2f7 has been reserved
system 00:07: ioport range 0x2f8-0x2ff has been reserved
system 00:07: ioport range 0x300-0x377 has been reserved
system 00:07: ioport range 0x380-0x3bb has been reserved
system 00:07: ioport range 0x3c0-0x3e7 has been reserved
system 00:07: ioport range 0x3f6-0x3f7 has been reserved
system 00:07: ioport range 0x400-0x4cf has been reserved
system 00:07: ioport range 0x4d2-0x57f has been reserved
system 00:07: ioport range 0x580-0x677 has been reserved
system 00:07: ioport range 0x680-0x777 has been reserved
system 00:07: ioport range 0x780-0x7bb has been reserved
system 00:07: ioport range 0x7c0-0x7ff has been reserved
system 00:07: ioport range 0x8e0-0x8ff has been reserved
system 00:07: ioport range 0x900-0x9fe has been reserved
system 00:07: ioport range 0xa00-0xafe has been reserved
system 00:07: ioport range 0xb00-0xbfe has been reserved
system 00:07: ioport range 0xc80-0xcaf has been reserved
system 00:07: ioport range 0xcb0-0xcbf has been reserved
system 00:07: ioport range 0xcc0-0xcf7 has been reserved
system 00:07: ioport range 0xd00-0xdfe has been reserved
system 00:07: ioport range 0xe00-0xefe has been reserved
system 00:07: ioport range 0xf00-0xffe has been reserved
system 00:07: ioport range 0x2000-0x20fe has been reserved
system 00:07: ioport range 0x2100-0x21fe has been reserved
system 00:07: ioport range 0x2200-0x22fe has been reserved
system 00:07: ioport range 0x2300-0x23fe has been reserved
system 00:07: ioport range 0x2400-0x24fe has been reserved
system 00:07: ioport range 0x2500-0x25fe has been reserved
system 00:07: ioport range 0x2600-0x26fe has been reserved
system 00:07: ioport range 0x2700-0x27fe has been reserved
system 00:07: ioport range 0x2800-0x28fe has been reserved
system 00:07: ioport range 0x2900-0x29fe has been reserved
system 00:07: ioport range 0x2a00-0x2afe has been reserved
system 00:07: ioport range 0x2b00-0x2bfe has been reserved
system 00:07: ioport range 0x2c00-0x2cfe has been reserved
system 00:07: ioport range 0x2d00-0x2dfe has been reserved
system 00:07: ioport range 0x2e00-0x2efe has been reserved
system 00:07: ioport range 0x2f00-0x2ffe has been reserved
system 00:07: ioport range 0x5000-0x50fe has been reserved
system 00:07: ioport range 0x5100-0x51fe has been reserved
system 00:07: ioport range 0x5200-0x52fe has been reserved
system 00:07: ioport range 0x5300-0x53fe has been reserved
system 00:07: ioport range 0x5400-0x54fe has been reserved
system 00:07: ioport range 0x5500-0x55fe has been reserved
system 00:07: ioport range 0x5600-0x56fe has been reserved
system 00:07: ioport range 0x5700-0x57fe has been reserved
system 00:07: ioport range 0x5800-0x58fe has been reserved
system 00:07: ioport range 0x5900-0x59fe has been reserved
system 00:07: ioport range 0x5a00-0x5afe has been reserved
system 00:07: ioport range 0x5b00-0x5bfe has been reserved
system 00:07: ioport range 0x5c00-0x5cfe has been reserved
system 00:07: ioport range 0x5d00-0x5dfe has been reserved
system 00:07: ioport range 0x5e00-0x5efe has been reserved
system 00:07: ioport range 0x5f00-0x5ffe has been reserved
system 00:07: ioport range 0x6000-0x60fe has been reserved
system 00:07: ioport range 0x6100-0x61fe has been reserved
system 00:07: ioport range 0x6200-0x62fe has been reserved
system 00:07: ioport range 0x6300-0x63fe has been reserved
system 00:07: ioport range 0x6400-0x64fe has been reserved
system 00:07: ioport range 0x6500-0x65fe has been reserved
system 00:07: ioport range 0x6600-0x66fe has been reserved
system 00:07: ioport range 0x6700-0x67fe has been reserved
system 00:07: ioport range 0x6800-0x68fe has been reserved
system 00:07: ioport range 0x6900-0x69fe has been reserved
system 00:07: ioport range 0x6a00-0x6afe has been reserved
system 00:07: ioport range 0x6b00-0x6bfe has been reserved
system 00:07: ioport range 0x6c00-0x6cfe has been reserved
system 00:07: ioport range 0x6d00-0x6dfe has been reserved
system 00:07: ioport range 0x6e00-0x6efe has been reserved
system 00:07: ioport range 0x6f00-0x6ffe has been reserved
system 00:07: ioport range 0xa000-0xa0fe has been reserved
system 00:07: ioport range 0xa100-0xa1fe has been reserved
system 00:07: ioport range 0xa200-0xa2fe has been reserved
system 00:07: ioport range 0xa300-0xa3fe has been reserved
system 00:07: ioport range 0xa400-0xa4fe has been reserved
system 00:07: ioport range 0xa500-0xa5fe has been reserved
system 00:07: ioport range 0xa600-0xa6fe has been reserved
system 00:07: ioport range 0xa700-0xa7fe has been reserved
system 00:07: ioport range 0xa800-0xa8fe has been reserved
system 00:07: ioport range 0xa900-0xa9fe has been reserved
system 00:07: ioport range 0xaa00-0xaafe has been reserved
system 00:07: ioport range 0xab00-0xabfe has been reserved
system 00:07: ioport range 0xac00-0xacfe has been reserved
system 00:07: ioport range 0xad00-0xadfe has been reserved
system 00:07: ioport range 0xae00-0xaefe has been reserved
system 00:07: ioport range 0xaf00-0xaffe has been reserved
system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xd000-0xdfff
pci 0000:00:01.0:   MEM window: 0xdfd00000-0xdfefffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0xdfc00000-0xdfcfffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
pci 0000:00:1e.0:   MEM window: 0xdfb00000-0xdfbfffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfefffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 1 mem: [0xdfc00000-0xdfcfffff]
pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:03: resource 1 mem: [0xdfb00000-0xdfbfffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8355k freed
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1715
alg: No test for stdrng (krng)
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 6144k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:9ea4
vesafb: pmi: set display start = c00c9f46, set palette = c00ca004
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 128150 bytes,<6>...found (1024x768, 128042 bytes, v3).
Console: switching to colour frame buffer device 107x34
fb0: VESA VGA frame buffer device
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /class/input/input1
ACPI: Power Button [VBTN]
processor ACPI_CPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /class/input/input2
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2461]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.03.01-k1
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.1
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.2 (January 21, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20
ata_piix 0000:00:1f.5: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.4
pcnet32.c:v1.35 21.Apr.2008 [email protected]
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdffdac00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 1-4: new high speed USB device using ehci_hcd and address 4
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: ST3808110AS, 3.ADJ, max UDMA/133
ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
usb 1-4: configuration #1 chosen from 1 choice
ata1.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST3808110AS      3.AD PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input3
generic-usb 0003:0461:4D15.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
usb 7-1: new full speed USB device using uhci_hcd and address 2
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX310S, VDK2, max UDMA/100
ata2.00: configured for UDMA/100
usb 7-1: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input4
microsoft 0003:045E:00F9.0002: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-2/input0
microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
scsi 3:0:0:0: CD-ROM            SONY     CDRWDVD CRX310S  VDK2 PQ: 0 ANSI: 5
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input5
microsoft 0003:045E:00F9.0003: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-2/input1
sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ata4: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 432k freed
fuse init (API version 7.11)
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:41:0c:62
0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
0000:00:19.0: eth0: MAC: 6, PHY: 7, PBA No: 1021ff-0ff
scsi 6:0:0:0: Direct-Access     LEXAR    JD FIREFLY       1100 PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
sd 6:0:0:0: [sdb] 3963904 512-byte hardware sectors: (2.02 GB/1.88 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
NTFS volume version 3.1.
NTFS volume version 3.1.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 2-standalone.tree-30-20091130
udevd version 124 started
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Linux agpgart interface v0.103
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
rtusb init --->


=== pAd = f8cb1000, size = 474440 ===

<-- RTMPAllocAdapterBlock, Status=0
ra0 (): not using net_device_ops yet
usbcore: registered new interface driver rt2870
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
Linux video capture interface: v2.00
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usbcore: registered new interface driver snd-usb-audio
pwc: Logitech QuickCam 4000 Pro USB webcam detected.
pwc: Registered as /dev/video0.
input: PWC snapshot button as /class/input/input6
usbcore: registered new interface driver Philips webcam
input: HDA Intel Line In at Ext Rear Jack as /class/input/input7
input: HDA Intel Mic at Ext Front Jack as /class/input/input8
input: HDA Intel Mic at Ext Rear Jack as /class/input/input9
input: HDA Intel Speaker at Ext Rear Jack as /class/input/input10
input: HDA Intel Speaker at Ext Rear Jack as /class/input/input11
input: HDA Intel Speaker at Ext Rear Jack as /class/input/input12
input: HDA Intel Speaker at Ext Rear Jack as /class/input/input13
input: HDA Intel HP Out at Ext Front Jack as /class/input/input14
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
lp: driver loaded but no devices found
ip_tables: (C) 2000-2006 Netfilter Core Team
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
NET: Registered protocol family 10
lo: Disabled Privacy Extensions

Ensuite jai tenter celle la si il trouvai mon driver et je crois quil la trouver Donc en gros tout devrai fonctionner...

[email protected]:~# modprobe -l | grep 2870
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2870sta.ko
[email protected]:~# modprobe -l | grep wireless...
/lib/modules/2.6.30.9/kernel/drivers/char/pcmcia/ipwireless/ipwireless.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/ath5k/ath5k.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rndis_wlan.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rtl_ieee80211/ieee80211-rtl.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rtl_ieee80211/ieee80211_crypt_ccmp-rtl.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rtl_ieee80211/ieee80211_crypt_wep-rtl.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rtl_ieee80211/ieee80211_crypt-rtl.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rtl_ieee80211/ieee80211_crypt_tkip-rtl.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/adm8211.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/atmel_pci.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/airo.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/libertas/libertas.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/libertas/libertas_sdio.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/libertas/libertas_cs.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/libertas/usb8xxx.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/ar9170/ar9170usb.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rtl8187/r8187.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/b43/b43.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/ray_cs.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/atmel.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/prism54/prism54.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/wl3501_cs.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/at76c50x-usb.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/zd1201.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/mac80211_hwsim.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/airo_cs.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2870sta.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/zd1211rw/zd1211rw.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/p54/p54common.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/p54/p54pci.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/p54/p54usb.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/b43legacy/b43legacy.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/hostap/hostap.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/hostap/hostap_cs.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/hostap/hostap_pci.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/hostap/hostap_plx.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rtl818x/rtl8187.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rtl818x/rtl8180.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2860sta.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/iwlwifi/iwlagn.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/mwl8k.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/atmel_cs.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/ath9k/ath9k.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt3070sta.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/ipw2x00/ipw2100.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/ipw2x00/libipw.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/ipw2x00/ipw2200.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/orinoco/orinoco_plx.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/orinoco/orinoco_cs.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/orinoco/orinoco_nortel.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/orinoco/orinoco_tmd.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/orinoco/spectrum_cs.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/orinoco/orinoco_pci.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/orinoco/orinoco.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2x00/rt2500usb.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2x00/rt2500pci.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2x00/rt61pci.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2x00/rt2400pci.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/libertas_tf/libertas_tf_usb.ko
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/libertas_tf/libertas_tf.ko
/lib/modules/2.6.30.9/kernel/net/wireless/cfg80211.ko
/lib/modules/2.6.30.9/kernel/net/wireless/wl.ko
/lib/modules/2.6.30.9/kernel/net/wireless/lib80211_crypt_tkip.ko
/lib/modules/2.6.30.9/kernel/net/wireless/lib80211_crypt_ccmp.ko
/lib/modules/2.6.30.9/kernel/net/wireless/lib80211.ko
/lib/modules/2.6.30.9/kernel/net/wireless/lib80211_crypt_wep.ko

jai verifier sil trouvai mon driver et il le trouve big_smile

[email protected]:~# modprobe -l | grep 2870
/lib/modules/2.6.30.9/kernel/drivers/net/wireless/rt2870sta.ko

jai fait un teste avec airodump-ng pour commencer
et sa fonctionne

CH  6 ][ Elapsed: 56 s ][ 2010-01-21 21:36

BSSID              PWR  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID

00:22:75:CF:8F:FE    0      385       15    0   1  54e  WPA2 CCMP   PSK  Sens
00:22:6B:8A:31:3B   -1        0        0    0   5  -1                    <length:  0>

BSSID              STATION            PWR   Rate    Lost  Packets  Probes

00:22:6B:8A:31:3B  00:21:00:EC:86:29    0    0 - 1      0       23
^C

et jai une question la dessus lol c'est quoi sa <length> sa veu dire quoi?

Bon ensuite jai voulu faire le teste de changer la mac et voir si je pouvai repartir normal par la suite et ce n<est pas le cas jaimerai etre eclairer a ce sujet merci
voila quest ce que sa me donne:

[email protected]:~# airmon-ng stop ra0


Interface       Chipset         Driver

ra0             Ralink 2560 PCI rt2500 (monitor mode disabled)

[email protected]:~# ifconfig ra0 down
[email protected]:~# macchanger --mac 00:11:@2:33:44:55 ra0
Current MAC: 00:1d:6a:44:6f:48 (unknown)
Faked MAC:   00:11:00:33:44:55 (Ram Industries, Llc)
[email protected]:~# airmon-ng start ra0


Interface       Chipset         Driver


[email protected]:~# airmon-ng start ra0


Interface       Chipset         Driver

J'aimerai savoir qu'est-ce-qui ce passe au juste pour quoi il ne veux pas repartir normalement??

et troisieme question j'ai toujour mon probleme la avec backtrack 3 fusion qui fonctionnai auparavant avant que jinstale windows seven alors comment regler cela merci d'avance pour vos réponse si rapide big_smile


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

#60 20-01-2010 10:52:30

antares145
Membre d'honneur
Inscription : 29-09-2009
Messages : 5 199
Site Web

Re : petit probleme avec windows 7 je crois!!!!!

Bon, ben au moins ca finit par marcher avec BT4 (Alleluia, le Seigneur est grand !) smile

Bon, j'te réponds ici quand même, mais tes dernières questions n'ont plus rien à voir avec Win7, donc si tu en as d'autres ti devrais créer un autre topic...
- "Length" ca veut dire "Longueur" big_smile le <length:0> normalement ca indique un SSID (non de réseau) masqué. Dans ce cas-ci, comme le channel et le power sont tous les 2 à -1, je dirais que c'est un paquet corrompu qu'Airodump a essayé de décoder comme il pouvait, donc ca donne rien... Si t'attends quelques minutes il va même disparaître de la liste parce qu'on ne sait rien en faire hmm
- pour le macchanger :

[email protected]:~# ifconfig ra0 down
[email protected]:~# macchanger --mac 00:11:@2:33:44:55 ra0

Tu commences par désactiver ta carte avec [c]ifconfig down[/c], très bien, mais tu oublies de la réactiver après avec un [c]ifconfig ra0 up[/c], donc pour le système la carte est toujours coupée, donc tu ne peux pas l'utiliser wink

Et pour la dernière question, c'est la seule qui peut encore être traitée ici... Mais honnêtement je commence à être à court d'idées sad et je pense que si quelqu'un savait "comment régler ca", il te l'aurait déjà dit wink

Hors Ligne

#61 20-01-2010 15:58:00

CruorVinco
Membre V.I.P.
Lieu : gatineau,québec
Inscription : 18-12-2009
Messages : 297

Re : petit probleme avec windows 7 je crois!!!!!

uai j'avoue merci pour ces réponce mec c'est top^^ mais une chose pour quoi que sur bt-3 fusion sa fonctonnai sans faire ifconfig-ra0 up c'est bizzard pourtant


si tu ne cherche pas par toi meme en premier...tu n'arrivera pas a grand chose!!!

Hors Ligne

Annonce

Visitez la boutique Wifi-highpower.com, votre revendeur agr Alfa Network: du matriel Wifi slectionn, cartes Wifi USB Awus036h et Awus036nh, antennes omnis, yagis, panel, amplis wifi, accessoires...

Sujets similaires

Discussion Réponses Vues Dernier message
0 34 Hier 21:32:19 par tit64
4 310 20-11-2016 14:31:08 par richie
Épinglée :
21 14673 20-11-2016 12:53:07 par richie
Problème reaver par Antho3674
4 294 15-11-2016 22:05:12 par kcdtv
Routeur avec antenne amovible par le flibustier
0 229 07-11-2016 19:12:24 par le flibustier

Pied de page des forums


Le coin des bonnes affaires, achats informatiques:


|   Alfa 1000 mW AWUS036H   |    Linksys WRT54GL   |    Misco, informatique   |   
 |    Ebay   |    PC portables   |    PC Gamers & Tuning   |    Cles USB   |   
|   Disques durs externes 2 To   |   
|   Wifi-highpower.com   |   


Server Stats - [ Generated in 0.038 seconds ]   Forum Stat - [ Most users ever online on the forum was : 150 on 20-09-2009 17:06:59 ]